XT30/XT60 Parallel Charging Board for LiPo Batteries (2-6S / XT60 for Main Plug)

Regular price $19.99

Shipping calculated at checkout. See Shipping Policy for shipping times.


  • Supports up to four packs same cells 2-6S battery.
  • 18AWG multi-strand silicone output wire help balance port.
  • Comes with safety protection T plug silicone cap.
  • High-quality gold-plated connectors.
  • Thickened PCB copper foil, ensure security when charging current up to 35A.
  • Equipped with 40A fuse between any two sets of batteries to prevent wires burned due to high battery voltage.


  • Item: Parallel Charging Board
  • Current: Supports MAX. 35A charge current
  • Balance Output Cable: 18AWG silicon cable
  • Supports: 2-6S
Use this  XT60 Parallel Charging Board to charge multiple batteries simultaneously or simply keep all your battery adapters plugged in at all times, to avoid having to swap out connectors for different battery types. This charging board features thickened PCB copper foil, to ensure a safe 30A load current.

Note: Always confirm that your power supply provides a sufficient amount of amperage, in order to charge the quantity/type of battery you are attempting to charge. Amps Needed equals Number of Batteries Being Charged times Milliamps divided by 1000.(For example: A quantity of three 1500mAh LiPo Batteries would need a power supply capable of supplying 4.5 Amps).

Warning: Before charging batteries, be sure all batteries connected have the same number of cells and milliamp capacities, as well as individual cell voltage readings ranging NO GREATER than 0.1 to 0.3 volts. Failure to follow these instructions could cause battery damage, and potentially create a risk of fire hazard.


1*PG Parallel Charging Board



Sold Out