Introducing one of the most anticipated 20×20 6S ESCs by Aikon! As FPV racers we are all striving to make our builds as lightweight as possible, with this 20×20 ESC from Aikon you will be able to do just that without sacrificing reliability. This 35A ESC forms part of the new generation that uses a variety of bleeding-edge technologies in hardware and firmware.
FEATURES:
- Programmable PWM frequency of up to 48KHz
- Auto-timing for higher efficiency and reliability
- ESC Telemetry (Voltage and RPMs and current)
- Configuring from FC using DShot commands
- Analog Voltage/Current sensing
- Improve direction change in Bidirectional mode
SPECIFICATIONS:
- Input Voltage: 2-6S LiPo
- Constant Current: 35A
- Burst Current: 45A
- Mounting Hole: 20 x 20mm
- Firmware: BLHeli32
- MCU: STM32PINF0
- Bootloader: Yes
- Weight (w/ wire): 0.35oz (10g)
- Signal Wire length: 3.93" (100mm)
- Battery Wire length: 3.93" (100mm)
HELPFUL LINKS:
INCLUDES:
(1) Aikon AK32PIN V2 4-In-1 ESC (20x20 / 35A / 2-6S)
(1) 35V / 470uF Capacitor
(1) Power Leads w/ XT60 Connector
(5) M2 Grommets (Red)
(5) M2 / 6mm Spacers (White)
(5) M2 / 4mm Spacers (White)
(1) 8-Pin JST Housing
(1) 12-Pin JST Housing
(1) 8-Pin JST Cable
(1) 10-Pin JST Cable
(1) Pin-Out Diagram