This is the Solder Only version of the new Lightning H7 500mhz Flight Controller for those who prefer to solder rather than use connectors.
AI NEUTRAL NETWORKING
Using advanced AI techniques the new flight controller supports advanced AI and neural networking. From filters to tuning, we hope to move many processes to a utilize Artificial Intelligence.
GPS RETURN TO HOME
Via external GPS module, you can now have your drone automatically return to home. With just the flick of a switch, or on failsafe drone will return above your head, and circle till you land it.
ADVANCED VECTOR GRAPHICS OSD
Most advanced OSD design on a flight controller that's currently available in our hobby. Driven by the power of the H7 processor, it can display any shape and design live in your OSD. From boot up graphics to full live charts, and animated menus the possibilities are endless.
Mount directly in a 30.5mm x 30.5mm hole pattern, or snap off the outside holes and mount directly in a 20mm x 20mm mount. Don’t worry about the 30.5mm x 30.5mm from snapping off, because they are engineered to only be removed under higher forces. If your flight controller ever had the holes snap, the crash was so hard, that the breakpoints will actually keep your flight controller from being damaged.
- H7 Processor up to 10x faster than F7.
- Vector OSD (that means very cool animations among other things).
- Pit Switch built-in.
- Adjustable Camera/VTX voltage.
- Fully DJI compatible.
- Full-size soldering pads, with drilled holes for strength underneath connectors.
- Tons of storage for advanced AI, Logging, etc.
- M2 & M3 Mounting Holes
- Neural Networking aka AI support, and features already being developed by FlightOne.
- 500mhz H7 Processor
- Graphical Vector OSD
- Free Replacement Plan
- Full AI Support
- High power voltage regulator
- 3-6S Lipo Battery Powered
- DJI FPV Support
- GPS Return to Home Support
- 5v or VBAT Camera/VTX Connection
- Built-in pit switch
- 1Gb Flash for logging/AI features
- Easy Connectors for All Devices
- Strong Solder Pads (reinforced with via)
- 7 UART/USARTS
- 30.5mm x 30.5mm mounting
- 20mm x 20mm mounting
- Full Size Solder Pads Available
- Camera Control
(1) FlightOne H7 Lightning Flight Controller