Diatone GTB 339 Cube 3" FPV Micro Brushless Drone (BNF / FrSky or PNP)

Diatone GTB 339 Cube 3" FPV Micro Brushless Drone with FlightOne/FalcoX software installed.

BNF RADIO RECEIVER OPTIONS:

A) BNF (Bind-n-Fly): XM+

B) PNP (Plug-n-Play): Purchase a radio receiver of your choice along with this drone and request a free install at checkout.

SPECIFICATIONS: 

• MAMBA F411AIO
• STM32F411
• Gyro: MPU6000
• 2x UART ports
• OSD inbuilt
• BEC 5V 1.5 A
• Size: 28.5*28.5mm
• Mounting holes: 25.5*25.5mm M2
• Weight: 6.1g
• Target: Mamba F411 FalcoX
• Input voltage : 2-4S LIPO
• CONTINUE CURRENT: 25A×4
• Camera: Runcam Nano                                                            
• Antenna: Copper pipe antenna                                                                              
• VTX: TBS UNIFY PRO32 NANO                                                        
• Motor: MAMBA Racing MB 1105 5500KV

FlightOne Recommendations :

• Bi-Blade props – 2s or 3s Battery  300-550 mah
• After every crash, make sure motors are spinning freely before arming

*Caution: Do not use 4S batteries with this drone. The use of a higher voltage than the recommended 2-3S battery may cause ESC to burn out.

HELPFUL LINKS & INSTRUCTIONS:

Universal Receiver Plug Port Standard for FRSky JST1.25 (Sbus)

1.Mamba F411 AIO Stack Diagram

2.Diatone 339 Initial Flightone Falco Setup

3.Reset initialization

   1）Beta Configurator Download: Click  Link

   2）Input command: Resetconfig custom  in software Terminal Blank-  and Enter