Happy Model Larva X is hands down the best flying micro out there. Easily the best micro drone under 100 grams. - Stew / UAVFutures
Notes: The LarvaX will include either the HQPROP T2.5*2.5*3 or EMAX Avan randomly.
SPECIFICATIONS:
- Wheelbase: 100mm
- Size: 88mm*88mm*45mm(without propellers)
- Weight: 50g(without battery)
- Recommended Battery: 3S 300mah/350mah or 2S 450mah
FEATURES:
- New Crazybee F4 PRO V3.0 AIO Flight controller 2-4s Lipo Compatible
- Powerful and smoothly
- Betaflight OSD support, easy to get RSSI, Voltage, current from your goggles
- Camera Angle adjustable
- VTX power switchable 25mw~200mw
- Smartaudio ready, change VTX bands, powers, channels via OSD
- Diamond VTX Ready
- Compatible both for 2s-3s Lipo/LIHV
INCLUDES:
(1) Larva X frame(1) Receiver Option1: Crazybee F4FR V3.0 PRO FC
(4) 1103 KV7000 motor
(1) 2.5inch propellers (4cw+4ccw)
(1) Camera: Runcam Nano2
(1) VTX: 5.8g 25mw~200mw switchable with 720p DVR (Diamond_vtx)
(1) Propeller disassemble tool
(1) Screwdriver
Spare parts specifications:
Motor:
- EX1103
- 7000 Kv
- Configuration:9N12P
- Stator Diameter:11mm
- Stator Length:3mm
- Shaft Diameter: Φ1.5mm
- Motor Dimension(Dia.*Len):Φ13.5mm*16mm
- Weight(g):3.7g
Flight controller:
- (No RX version) CRAZYBEE F4 PRO V3.0 Firmware target: CrazybeeF4DX
- MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
- Sensor: MPU-6000(SPI connection)
- Board size: 28.5 * 28.5MM
- Power supply: 2-4S battery input (DC 7-17V)
- Built-in 10A(each) Blheli_S 4in1 ESC Dshot600 ready
- Built-in Betaflight OSD(SPI Control)
- Built-in Current meter Max 70A
- Current meter scale set to 470
- Built-in 5V 1A BEC
- Built-in voltage detection
Onboard 4in1 ESC:
- MCU upgraded to EFM8BB21
- Power supply: 2-4S LiPo/LiPo HV (7v/17v)
- Current: 10A continuous peak 12A (5 seconds)
- Support BLHeliSuite programmable
- Factory firmware: F_H_40_REV16_5.HEX
- Default protocol: DSHOT600
External Frsky XM+ version:
- Weight: 1.5g
- Operating Voltage Range: 3.5V~10V
- Operating Current:70mA@5V
- Firmware Upgradable
- Compatibility: FrSky X Series modules and radios in D16 mode
Diamond_VTX:
- Output power: 25~200mw switchable
- Frequency: 40CH
- Input voltage: 3.3V 5.5V
- Current consumption: 250mA~510mA(type)
- Antenna: RG178 antenna
- U.FL interface
- Frequency: 5.8GHz 5bands 40 channels w/ Raceband
- Smartaudio ready
- Weight: 3g without antenna
- Video Output Size: VGA (640×480)
- Video Output Format: NTSC
- Record video size: 1280×720 @25FPS
- TF Card support: Max 32G
- Interface: JST SH1.0 3pin for Camera
- JST SH1.0 5pin for Connect with F3/F4 Flight controller
- Compress Format: AVI
Camera:
- Model: Runcam Nano 2
- Image Sensor: 1/3″ CMOS
- Horizontal Resolution: 700TVL
- Lens: 2.1mm(M8) FOV 155°
- Signal System: NTSC / PAL
- S/N Ratio: >50dB
- Electronic Shutter Speed: Auto
- Auto Gain Control (AGC): Auto
- Min. Illumination: 0.01Lux@1.2F
- D-WDR: Auto
- Day/Night: Color
- Power: DC 3-5.5V
- Current : 110mA@5V 120mA@3.3V
- Housing Material: ABS
- Net Weight: 3.2g
- Dimensions: L14mm*W14mm*H16mm
Attention: These drones come flashed with a custom firmware from the manufacturer to provide optimal performance. Updating the firmware may cause undesirable results, including bricking the board.