FAST SHIPPING & IN-STORE PICKUP AVAILABLE



iFlight Cidora SL5 V2.1 HD Brushless FPV Drone (BNF / FrSky or DJI / 6S)

Regular price $409.99

Shipping calculated at checkout. See Shipping Policy for shipping times.

The Cidora SL5 V2.1 HD w/ DJI Air Unit BNF features the amazing new DJI FPV system. This quad makes flying FPV truly breathtaking. With the 720p video shown at 120fps through the goggles, DJI has set the bar at a new high for clarity and image quality in an FPV system. This frame offers a squashed X layout for maximum control, equipped with a SucceX-D F7 (50A 4-in-1 ESC) stack, and popular XING motors. 

 

BIND-N-FLY RADIO RECEIVER OPTIONS:

A) R-XSR (pre-installed) for FrSky Transmitter (and/or FrSky Module)

B) DJI Air Unit (pre-installed) for DJI FPV Transmitter

    C) Purchase a radio receiver of your choice (to match the protocol of your Non-DJI/Non-FrSky Radio Transmitter).

    *Technical Services are available as an add-on service for a receiver swap.

     

    FEATURES:

    • Optimized weight distribution: DJI unit and Stack centered 
    • Equipped with SucceX-D F7(SucceX 50A BLHeli32 4-in-1 ESC) Stack
    • Equipped with the DJI FPV Air Unit as well as the FrSky R-XSR Receiver. 
    • Buttery-smooth 720p 120fps FPV feed
    • Pre-tuned with smooth freestyle settings (see Firmware Factory Dumps
    • Full 3K Carbon Fiber airframe with chamfered arms
    • Equipped with XING 2207 1800KV 6S Motors
    • Weight: 445.4g (without battery)
    • LED illuminated Logo


    SPECIFICATIONS:

    • Total Dimensions: 166 x 139mm (body dimension)
    • Frame Wheelbase: 217mm
    • Bottom to top distance: 28mm
    • Arm thickness: 5.5mm
    • Bottom plate thickness: 2.5mm
    • Top plate thickness: 2mm
    • Upper (middle) plate thickness: 3mm
    • Camera plate thickness: 2.5mm (included TPU inserts)
    • Weight: 15.71oz (without battery and GoPro mount)
    • Components:
      • SucceX-D F7 TwinG V2.1 Flight Controller
      • SucceX 50A 2-6s BLHeli32 4-in-1 ESC Dshot1200
      • XING 2207 1800KV (6S)
      • Nazgul 5140 propellers

          Flight Controller:

          • Item: SucceX-D F7 V2,1 TwinG
          • Gyro: 2x ICM20689
          • Baro: YES
          • Blackbox: 32MB
          • Betaflight OSD: YES
          • BEC: 5V 2.5A / 9V 2.5A
          • Current sensor scale:  100
          • Inverter for SBUS input (UART2-RX)
          • Smart audio & Tramp VTX protocol supported
          • Beeper pad: Yes
          • UARTs:5
          • Motor outputs: 8
          • 8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5)
          • 6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V)
          • BLHeli32 Telemetry:RX5
          • Input voltage: Recommended 2-6S, MAX 8S
          • Firmware Target:   IFLIGHT_F722_TWING
          • Mounting pattern: 30.5 x 30.5mm φ4mm with Grommets φ3mm
          • Dimensions:   36 x 36mm
          • Weight: 0.26oz
          • USB Type-C
          • Battery Connector: XT60 Male

              ESC:

              • Item: SucceX 50A 2-6S BLHeli32 4-in-1 
              • Mounting Holes: 30.5 x 30.5mm / Φ3mm
              • Weight: 0.51oz
              • Volts input: 2-6S
              • STM32F051 MCU, 48Mhz Runs BLHELI 32.X Firmware
              • Current sensor: Yes
              • Telemetry: Supported
              • Supports: DShot150 / 300 / 600 / 1200
              • Target: iFlight-BL32-4IN1 (See BLHeli32 Download under Helpful Links)

               

              HELPFUL LINKS:

               

              INCLUDES: 

              (1) Cidora SL5 V2.1 Brushless 6S FPV Drone
              (1) FrSky R-XSR v2.1 Radio Receiver (pre-installed)
              (1) DJI FPV Camera
              (1) DJI FPV Air Unit Module
              (2) DJI LHCP RP-SMA 5.8GHz FPV Antennas
              (2) Sets of Nazgul 5140 Propellers 
              (1) 20x250mm Battery Strap
              (1) 20x200mm Battery Strap

               

              NOTES:

              • The Frsky receiver installed on this drone will only bind with the latest Frsky module protocol 2.1 version. If your transmitter or module doesn't have the latest Frsky version, you will have to downgrade this receiver's firmware to FW-RXSR-ACCST_v191128. We can perform this service for a $10 fee per device.

              Sale

              Unavailable

              Sold Out