iFlight Nazgul5 V2 Brushless FPV Drone (BNF / FrSky / 6S)

Regular price $299.99

Shipping calculated at checkout. See Shipping Policy for shipping times.

Nazgul5 V2 is a 5" sized FrSky Quadcopter. Pre-tuned and pre-setup, it's everything you need to bind and fly! Loads of power and smooth flights using iFlight's popular XING-E motors with long-lasting NSK bearings. 

 

Pre-Tuned and set up so you don't have to worry about a thing! iFlight did that for you already. A basic PID and Filter tuning was applied for a great flight experience! To restore lost tunes or updates, see the "Firmware/Factory Dumps" link below.

 

Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess! Please check the link below on "How to disable Angle-mode and activate Acro-Mode.

 

FEATURES:

  • 5mm arm design for more durability
  • Easy-Swap arms
  • LED illuminated Logo
  • XING-E 2207 motors and NAZGUL 5140 props
  • 5" version also fits 5.1" style propellers
  • Popular True-X configuration
  • TPU crash-guards
  • Fits both 30.5x and 20x stacks

 

SPECIFICATIONS:

Frame/Drone Parts: 

  • SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC
  • SucceX-E F7 V2.1 Flight Controller
  • XING-E 2207 FPV Motor / 6S 1800KV
  • Wheelbase: 240mm x 240mm
  • Body size: 170 x 170mm
  • Propeller size: 5 inch /5.1 inch
  • FC pattern: 30.5 x 30.5mm / 20 x 20mm
  • FPV cam spacing: 19mm
  • Weight: 13.87oz (393.4g) (without battery)


    Flight Controller:

    • FC // SucceX-E F7 Flight controller
    • MCU: STM32F22RET6 216MHz
    • Gyro: MPU6000
    • Baro: DSP310 (Barometer can only be used with Betaflight 4.3.0 and above)
    • OSD: IFLIGHT OSD (AT7456E)
    • BEC: 5V 2.5A
    • BlackBox: 16MB
    • Uart: 4*UART(UART1, UART2, UART4, UART5)
    • UART1 for VTX HD (for 4-6S Vista, for 4S DJI Air Unit) / Analog Telemetry
    • UART2 for Receiver
    • UART4 for Free
    • UART5 for ESC Telemetry
    • 4x Dshot/PWM outputs
    • Smartaudio & IRC Tramp VTX protocol supported
    • WS2812 led Strip: Yes
    • Beeper: Yes
    • Firmware: IFLIGHT_SUCCEX_E_F7
    • Outer Size: 36 x 36mm / 30.5 x 30.5 / φ4 mounting
    • Weight: 0.24oz (6.9g)

     

    ESC:

    • ESC // SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC
    • Dimension: 36 x 43mm
    • Mounting Holes: 30.5 x 30.5mm / Φ3mm
    • Weight: 0.52oz (15g) (without wire)
    • Supports 2-6S Lipo input
    • EFM8BB21 MCU, 24Mhz Runs BLHeli_S 16.X Firmware
    • Current sensor: YES
    • BEC: NO
    • Constant: 45A / Burst: 50A
    • Supports: DShot150/300/600/MultiShot/OneShot etc.
    • Target: G-H-30 BLS 16.7

       

      VTX:

      • SucceX Force
      • Stable output power
      • Transmit power 4 gear switch: 25mW/200mW/400mW/800mW
      • Output 48 frequency points
      • Frequency lock fast, the boot does not interfere with companions
      • Built-in output power self-check function
      • Full format video format: NTSC /PAL
      • Wide input voltage range: 7V~36V
      • Low power consumption: +12V/380mA@800mW
      • Small size: 36 x 36 x 3mm
      • Mounting holes: 4-M3
      • Lightweight: 0.25oz (7.2g) (excluding antenna)

       

      Receiver Options:

      • FrSky D8 or FrSky D-16 

       

      HELPFUL LINKS: 

       

      INCLUDES:

      (1) iFlight Nazgul5 V2 Brushless FPV Drone w/ R-XSR v2.1 or R81-SPI Radio Receiver (select your option)
      (1) RaceCam R1 Mini 1200TVL 2.1mm 19*19
      (1) Albatross RHCP SMA 5.8g Antenna
      (2) Sets x Nazgul 5 inch 3-blades (4CCW & 4CW - Color may vary)
      (1) 20 x 200mm Microfiber PU Leather Battery Strap (Color May Vary)
      (1) 20 x 250mm Microfiber PU Leather Battery Strap (Color May Vary)

       

      NOTES:

      • All iFlight BNFs are tested by Flight before shipment to guarantee the highest quality but for any reason if you still encounter a problem after receiving your shipment, please contact iFlight customer support at www.iflightrc.freshdesk.com.

        Sale

        Unavailable

        Sold Out