Introducing the new F722 Mini flight controller, paired with the Mamba F40 4-in-1 ESC. This 6S capable F7 Stack is more proof that 20x20 doesn't mean sacrificing features. Check out the specs and wiring diagram below for a look at the extensive FC features!
SPECIFICATIONS:
Flight Controller:
- MCU: 216MHz STM32F722RET6
- GYRO: MPU6000
- Barometer: Yes
- OSD: Yes
- Blackbox: 16M Flash Memory
- Uarts: 6 Set
- ESC Software: Dshot300/600
- ESC Telemetry: Yes
- Power Led: Yes
- LED Controller Pad: BF LED
- S/F.Port Pad: Yes
- RSSI Pad: Yes
- Buzz Pads: Yes
- Input: 2~6S Lipo (8.4~25.2V)
- TVS Protection: Yes
- BEC: 3.3V 0.5A & 5V 2.5A
- USB Port: Type-C
- Mounting Hole: 20mm - M2
ESC:
- Input Voltage: 2~6S Lipo (8.4V~25.2V)
- Continue Current: 40A×4
- Burst Current: 45A (10S)
- BEC: No
- Target: Mamba F40MINIPRO
- SOFT: Dshot300/600/1200
- TVS Protection: Yes
- Mounting Hole: 20mm - M3/M2
HELPFUL LINKS:
INCLUDES:
(1) Mamba F722 Mini DJI Betaflight Flight Controller
(1) Mamba F40 Mini Pro 6S HV ESC
(1) Amass Male XT60-H Connector
(1) 16AWG 60mm Battery Lead Wires (Pre-installed)
(5) Purple Spacers
(4) Black Spacers
(5) Blue Spacers
(9) 7mm Blue Grommets
(5) 10mm Purple Grommets
(1) 35V 470UF Capacitor
(5) M2 25mm Screws
(5) M2 20mm Screws
(5) Clear Nylon Nut Set
(2) 8-pin ESC to FC cable
(1) Mamba 20x20 Interference Shield
(1) VTX/RX Mounting Plate