This Matek F411-WTE FC is the new updated version of the WSE. It is a great option for your fixed wing or airplane. It uses INAV firmware and has an updated barometer, two motor UARTS and four servo inputs.
SPECIFICATIONS:
- MCU: 100MHz STM32F411CEU6
- IMU: BMI270 (SPI)
- Barometer: SPL06-001 (I2C)
- OSD: AT7456E (SPI)
- Blackbox: No
- Uarts: 2
- Full Softserial: 2
- PWM outputs: 6 (2x Motors, 4x Servos)
- I2C: 1
- ADC: 4 (VBAT, Current, RSSI, AirSpeed)
- LEDs for FC STATUS: 3 (Blue, Red) and 3.3V indicator(Red)
- Built in inverter on UART2-RX for SBUS input
- Switchable Dual Camera Inputs
- Vbat power ON/OFF switchable for VTX and camera
- PPM receiver: not supported
- Mounting: 22 x 22mm, M2
- Dimensions: 31 x 26 x 16.5mm
Power:
- 6~30V DC IN (2~6S LiPo)
- 132A Current Sense (Scale 250)
- PDB/Current sense resistor: 90A continuous, 132A burst.
- BEC 5V 1.5A for FC & Peripherals
- BEC VX 5A for servos, 5V/ 6V option
- Vbat for VTX and camera (ON/OFF switchable)
- LDO 3.3V 200mA
- Battery Voltage Sensor: 1k:10k
FC Firmware
- Firmware: INAV
- Target: MATEKF411TE
PDB:
- Input voltage range: 6~30V (2~6S LiPo)
- Battery Voltage Sensor: 1k:10k
- Current Senor: 132A, Scale 250
HELPFUL LINKS:
INCLUDES:
(1) Matek F411-WTE Flight Controller for Wings & Planes
(1) Set of 12 Straight Servo Pins (Soldering Required)
(4) Screws