Mobula7 v2 Micro Brushless FPV Drone (1-2S / BNF / FrSky, Flysky or DSM2/DSMX)

Regular price $109.99

Shipping calculated at checkout. See Shipping Policy for shipping times.

Mobula 7 is a new series of 1s-2s compatible whoop drone from HappyModel, much more powerful and stable, you can fly it both indoor or outdoor.

Attention: These drones come flashed with a custom firmware from the manufacturer to provide optimal performance. Updating the firmware may cause undesirable results, including bricking the board. If an update has already been done, then click here to obtain the correct firmware.


  • New Mobula7 frame, more durable and lighter
  • Crazybee F3 PRO Flight controller 1-2s Lipo compatible
  • 2S whoop more powerful and more flight time
  • Betaflight support, multi-flight mode: ACRO/AIR/ANGLE
  • New 0802 Powerful and High-efficiency Brushless motor and Smooth ESC
  • Betaflight OSD support, easy to get RSSI, voltage, current from your goggles
  • Smart audio ready, change VTX bands, channels via OSD
  • Adjust the settings and the PID of the flight controller via OSD
  • Frsky Non-EU version support NON-EU Frsky transmitter D8/D16 compatible (Standard Version)
  • Flysky version support both AFHDS and AFHDS-2A protocol transmitter (Basic Version)
  • DSM2/DSMX version support DSM2 and DSMX compatible Spektrum transmitter (Basic Version)
  • Full telemetry function ready
  • Camera angle adjustable
  • Buzzer Ready

  • Specifications:

    • Item: 2S 75mm brushless whoop drone BNF
    • Wheelbase: 75mm
    • Size: 98mm*98mm*36mm
    • Weight: 27g(without battery)

    Spare Parts Specifications:

    Motor Mode: SE0802 KV16000
    Stator Diameter:8mm
    Stator Length:2mm
    Shaft Diameter:Φ1mm
    Motor Dimension(Dia.*Len):Φ10.5mm*14.5mm
    No.of Cells(Lipo):1S-2S
    Flight controller (Frsky version) CRAZYBEEF3 PRO FR Firmware target: CrazybeeF3FR
    (Flysky version) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS
    (DSM2/DSMX version) CRAZYBEEF3 PRO Firmware target: CrazybeeF3DX
    (Frsky EU-LBT version) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS
    MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
    Sensor: MPU-6000(SPI connection)
    Board size: 28.5 * 28.5MM
    Power supply: 1-2S battery input (DC 3.5-8.7V)
    Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
    Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)
    Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS2A switchable)
    DSM2/X Version built-in Serial-based DSM2/DSMX compatible satellite receiver
    Frsky EU-LBT version Built-in External XM+ receiver
    Built-in Betaflight OSD(SPI Control)
    Built-in Current meter Max 28A
    Current meter scale set to 1175
    Built-in 5V 1A Buck / Boost with LC filter
    Built-in voltage detection
    BLHELI_S pass-through Ready
    Heading LED Ready
    Onboard 4in1 ESC MCU upgraded to EFM8BB21
    Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v)
    Current: 5A continuous peak 6A (3 seconds)
    Support BLHeliSuite programmable
    Factory firmware: O_L_5_REV16_7.HEX
    Default protocol: DSHOT600
    Frsky NON-EU receiver Version SPI BUS receiver
    Frsky D8/D16 switchable
    Compatible Non EU transmitter both D8 and D16 mode
    Channels: 8ch or 16ch
    Failsafe support
    No ground interference ( Transmitter and receiver 1 m from the ground): 300m
    Flysky receiver Version SPI BUS receiver
    Protocol: AFHDS and AFHDS-2A Switchable
    Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
    No ground interference ( Transmitter and receiver 1 m from the ground): 300m
    Failsafe support
    DSM2/DSMX receiver version Serial bus receiver
    Protocol: DSM2/DSMX compatible
    Channels:6-9 (Depend on your radio)
    No ground interference ( Transmitter and receiver 1 m from the ground): 300m
    Frsky EU-LBT Version( External XM+ receiver) Operating Voltage Range: 3.7~10V
    Operating Current: 30mA @5V
    Operating Range: Full range
    With RSSI output on board: Analog 0~3.3V
    Firmware Upgradeable, Default firmware EU-LBT with RSSI
    AIO Camera&VTX Output power: 25mw
    Frequency: 40CH
    Input voltage: 3.3V 5.5V
    Current consumption: 300mA(type)
    Camera resolution: 700TVL
    Field of view: 120°
    Video Format: NTSC
    Antenna: RG178 antenna
    Frequency: 5.8GHz 5bands 40 channels
    With RacebandSmartaudio ready(Frsky EU-LBT and DSMX version not compatible)
    Size: 13.9″12.0mm ( L*W )
    Weight: 3g
    Lipo Battery Capacity:250mAh
    Continuous Discharge Rate: 30C
    Instantaneous discharge rate: 60C
    Size: 55mmx12mmx7mm
    Weight: 6.5gConnector: PH2.0*Notes: Need 2pcs batteries for Series circuit



    Sold Out