Introducing the H743 60A stack. With H7 processing speeds, and a high-performance 60A ESC that runs Blheli_32 firmware.
SPECIFICATIONS:
Flight Controller:
- MCU: STM32H743VIT6, 480MHz, 1MB RAM, 2MB Flash
- Gyro: BMI270 Single
- Barometer: BMP280
- OSD: AT7456E
- Blackbox: 16M
- Uarts: 8-Set with built-in inversion
- PWM outputs: 8
- I2C: Yes
- LEDs: FC Status (Blue/Green), and 3.3V Indicator (Red)
- USB: Type-C (USB2.0)
- Dual Camera Inputs switch
- VTX Switch: Yes
- DJI FPV OSD is supported by any spare UART
- Mounting Size: 30mm x 30mm, M3
- Input: 3-6S (12-26V)
- Dimensions: 39.5 x 39.5 x 7.8 mm
-
BetaFlight & Ardupilot: SKYSTARSH7HD
- Weight: 10.1g
ESC:
- Type: KO60 BLHeli_32
- Power supply voltage: 3-6S (12-26V)
- Continuous working current: 45A 60A
- No built-in 5V BEC output
- Firmware: BLHeli_32 ESC
- Mounting Size: 30 x 30mm
- Aperture: 4MM
- Supports: Dshot1200 / Dshot600 / Dshot300 / Dshot150 / Oneshot125 / Multishot / PWM control signal
INCLUDES:
(1) Skystars H743 HD + KO60 Stack
(1) Power Leads (Red & Black / 14 AWG)
(1) XT60-H Male Connector
(1) 35v 560uf Capacitor
(4) M3 Screws
(1) 6-Pin Cable
(1) 8-Pin Cable
NOTES:
- Manufacturer upgrades, alterations, and processor/firmware changes are frequently made without prior notice. Exact specifications, photos, and links cannot be guaranteed.