Introducing the Xerun AXE ESC & Motor Combo from HobbyWing. Made with Rock Crawlers in mind, this combo provides high-torque with extreme silence. It includes everything needed to install an FOC (Field-Oriented Control) Brushless system on your RC car. The waterproof and dust-proof design, made up to IP67 standards, allows the AXE brushless power system to be used in all weather & track conditions without any issue of damage caused to the system from water or dust.
- First FOC Brushless System for Rock Crawlers.
- The chip-type magnetic encoder inside the motor guarantees consistency between three phases’ signals and always outputs the pure and precise signals
- The innovative built-in Bluetooth connectivity allows users to read ESC data or update ESC firmware via a smartphone.
- Intelligent torque output & speed closed-loop control for easy control, and consistent motor RPM under all loads.
- The adjustable drag brake & drag brake rate control with the maximum drag brake of up to 200% (nearly twice the drag brake of standard brushless power systems) provides unprecedented parking capacity on slopes, with no jerky stops.
- Low-voltage cutoff, thermal, fail-safe (throttle signal loss), motor lock-up, and overcurrent.
- The advanced and secure electronic switch features a waterproof, dust-proof, and shock-resistant design.
- Name: AXE540L-2800KV-FOC System
- Part#: 38020313
- Part#: 30112102
- Cont./Peak Current: 80A/480A
- Input Voltage: 2-3S LiPo, 6-9S NiMh
- BEC Output: 6V/7.4V Switchable, Continuous Current of 6A (Switch-mode)
- Input Wires: Red/Black (12AWG / 200mm)
- Input Connector: XT60
- Programming Port: Built-in Bluetooth
- Firmware: iOS or Android smartphone (installed with the HW LINK app / Apple or Android)
- Size / Weight: 47.4 x 36.2 x 26.5mm / 108g (Included input wires)
- Part#: 30401255
- KV: 2800KV
- Motor Length: 57.8mm
- Motor Diameter: 36mm
- Shaft Diameter: 3.17mm
- Pole: 4-Pole
- Input Voltage: 2-3S
- No Load Current: 3.6A
- Recommended Scales: 1/10 to 1/8th
- Type: Waterproof
- Front Bearing Size: D5 x D13 x T4 (695DD)
- Rear Bearing Size: D6 x D15 x T5 (696DD)
(1) Xerun Axe R2 FOC ESC
(1) Xerun Axe R2 FOC Motor
- Xerun AXE ESC works exclusively with Xerun AXE brushless motor.
- Manufacturer does NOT recommend replacing motor bearings as this will void your warranty with HobbyWing.