In-Store Repairs & Troubleshooting Available

Excellent Customer Service

Free In-Store Pickup
1 5
SKU: 13707991

HappyModel Moblite7 1S HD Brushless FPV Drone (A30/BT2 or JST-PH / Walksnail / ELRS)

$229.99
Connector Type:

HappyModel Moblite7 1S HD Brushless FPV Drone (A30/BT2 or JST-PH / Walksnail / ELRS)

Introducing the Moblite7 v3, now with the Walksnail Avatar HD system. This brushless whoop packs speed and efficiency in a 75mm frame weighing just 33.5 grams. It also features a built-in SPI ELRS receiver and the RS1002 / 2000KV motors. 

 

FEATURES:

  • Walksnail Avatar Nano camera with Avatar Mini 1S V2 VTX 
  • SuperX HD ELRS AIO flight controller
  • Compatible with 1S Lipo/LIHV
  • RS1002 / 20000KV motors
  • UART ELRS v3.0 ready
  • Smooth and powerful

 

COMPATIBILITY:

  • Walksnail Avatar Goggles 
  • Radio Transmitter with ELRS Protocol
  • Batteries with A30/BT2 or JST-PH2 Connectors (Based on selection)

 

REQUIRED:

(1) Radio Controller w/ ELRS Protocol
(1) Walksnail FPV Goggles
(1) 1S 450mah/550mah/650 mah LiPo Battery with correct connector (Based on selection) 
(1) 1S LiPo Charger

     

    SPECIFICATIONS:

    Flight Controller:

    • Betaflight 4.4.2 firmware ready
    • Firmware target: CRAZYBEEF4DX
    • MCU: STM32F411CEU6 (100MHz, 512K FLASH)
    • Sensor: BMI270 or ICM42688P (SPI connection)
    • Power supply: 1S LiPo HV battery input due to motors 
    • Battery Connector: GNB A30 battery plug (both A30 and BT2.0 plug batteries are also compatible)

     

    VTX:

    • Model: Avatar Mini 1S module
    • Communication Frequency: 5.725-5.850 GHz
    • Transmitter Power(EIRP): FCC:<25.5dBm; CE:<14dBm; SRRC: <20dBm;MIC:<25dBm
    • l/o Interface: JST1.Ox6(Power in)JST1.Ox4(USB)
    • Mounting Holes: 25.5x25.5 mm
    • Dimensions: 33x33x6.5 mm
    • Storage: 8G
    • Recording: 1080p/720p
    • Weight: 0.24oz (6.8g)
    • Operating Temperature: -20-40℃
    • Channels: 8
    • Wide Power lnput: 3.1V-5V
    • Supported FC System: Betaflight
    • OSD: Canvas mode
    • Bitrate: 25mbps / 50mbps
    • Latency: Average delay 22ms
    • Antenna connector: IPEX

     

    ESC:

    • Power supply: 1S LiPo HV
    • Current: 12A continuous peak 15A (3 seconds)
    • Support ESC-Configurator and BLHELI_S Suite configurator
    • Factory firmware: Z-H-30 – Bluejay, 0.19, 48kHz
    • Default protocol: DSHOT300

     

    Receiver:

    • RF Frequency: 2.4GHz
    • Antenna: enameled copper wire 31mm length
    • Telemetry output Power: <12dBm
    • Receiver protocol: CRSF
    • Default firmware version: ExpressLRS V3.0.1
    • Coan update firmware via ExpressLRS configurator or WIFI or Betaflight pass-through

     

    Motors:

    • Model: 1002 / 20000KV
    • Configuration: 9N12P
    • Stator Diameter:10mm
    • Stator Length: 2mm
    • Shaft Diameter: Φ1.5mm
    • Motor Dimension(Dia.*Len): Φ13.5mmx12.5mm
    • Weight(g): 2.5g
    • No.of Cells(Lipo): 1S only

     

    Frame:

    • Camera: Avatar Nano
    • Wheelbase: 75mm
    • Size: 98mm x 98mm x 48mm
    • Weight: 1.21oz (34.5g)
    • Propellers: Gemfan 1610 2-Blade (40mm)

       

      INCLUDES:

      (1) HappyModel Moblite7 1S Brushless FPV Drone (Walksnail / ELRS) *Choose your connector type
      (4) Gemfan 1610-2 Bi-Blade Propellers (2CW + 2CCW / Red)
      (1) Spare Canopy
      (1) Screwdriver
      (1) Prop Tool

        Quick FAQs

        Is the product I want in stock?

        Unless a product shows a status of "Out of Stock", it is in-stock. All items shown on our website are shipped out by our brick-and-mortar store in Jacksonville, Florida during regular business hours.

        Where do you ship?

        We currently ship to the United States and all US Territories, including Puerto Rico.

        When will I receive my order?

        Processing times range from 24 - 36 hours or less, based on when an order is placed.

        Once picked up by the designated shipper, Economy service takes approximately 5-8 days, with Standard Shipping at 3-5 days, with some locations taking a bit longer.

        Please see our Shipping Policy for additional info and feel free to contact us for expedited shipping options.

        Can I pick up my order?

        Yes, we offer Free Pickup at our Jacksonville, Florida location, during regular business hours, in addition to our standard shipping options, at checkout.

        How do I return a product?

        Items can be returned In-Store during regular business hours.

        For online purchases, please e-mail us at sales@rc-n-go.com for a Return Authorization.

        Please see our Refund Policy for more details.

        View All FAQs
        Back to top