HappyModel Moblite7 1S HD Brushless FPV Drone (Walksnail / ELRS)
HappyModel Moblite7 1S HD Brushless FPV Drone (Walksnail / ELRS) is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
HappyModel Moblite7 1S HD Brushless FPV Drone (Walksnail / ELRS)
Introducing the Moblite7 v3, now with the Walksnail Avatar HD system. This brushless whoop packs speed and efficiency in a 75mm frame weighing just 33.5 grams. It also features a built-in SPI ELRS receiver and the RS1002 / 2000KV motors.
FEATURES:
- Walksnail Avatar Nano camera with Avatar Mini 1S V2 VTX
- SuperX HD ELRS AIO flight controller
- Comes with GNB A30 battery plug (both A30 and BT2.0 plug batteries are also compatible)
- Compatible with 1S Lipo/LIHV
- RS1002 / 20000KV motors
- UART ELRS v3.0 ready
- Smooth and powerful
REQUIRED:
(1) Walksnail FPV Goggles
(1) 1S LiPo Battery with A30 or BT2.0 connector and 450mah/550mah/650mah
(1) 1S LiPo Charger
SPECIFICATIONS:
Flight Controller:
- Betaflight 4.4.2 firmware ready
- Firmware target: CRAZYBEEF4DX
- MCU: STM32F411CEU6 (100MHz, 512K FLASH)
- Sensor: BMI270 or ICM42688P (SPI connection)
- Power supply: 1S LiPo HV battery input due to motors
VTX:
- Model: Avatar mini 1S module
- Communication Frequency: 5.725-5.850 GHz
- Transmitter Power(EIRP): FCC:<25.5dBm; CE:<14dBm; SRRC: <20dBm;MIC:<25dBm
- l/o Interface: JST1.Ox6(Power in)JST1.Ox4(USB)
- Mounting Holes: 25.5x25.5 mm
- Dimensions: 33x33x6.5 mm
- Storage: 8G
- Recording: 1080p/720p
- Weight: 0.24oz (6.8g)
- Operating Temperature: -20-40℃
- Channels: 8
- Wide Power lnput: 3.1V-5V
- Supported FC System: Betaflight
- OSD: Canvas mode
- Bitrate: 25mbps / 50mbps
- Latency: Average delay 22ms
- Antenna connector: IPEX
ESC:
- Power supply: 1S LiPo HV
- Current: 12A continuous peak 15A (3 seconds)
- Support ESC-Configurator and BLHELI_S Suite configurator
- Factory firmware: Z-H-30 – Bluejay, 0.19, 48kHz
- Default protocol: DSHOT300
Receiver:
- RF Frequency: 2.4GHz
- Antenna: enameled copper wire 31mm length
- Telemetry output Power: <12dBm
- Receiver protocol: CRSF
- Default firmware version: ExpressLRS V3.0.1
- Coan update firmware via ExpressLRS configurator or WIFI or Betaflight pass-through
Motors:
- Model: 1002 / 20000KV
- Configuration: 9N12P
- Stator Diameter:10mm
- Stator Length: 2mm
- Shaft Diameter: Φ1.5mm
- Motor Dimension(Dia.*Len): Φ13.5mmx12.5mm
- Weight(g): 2.5g
- No.of Cells(Lipo): 1S only
Frame:
- Camera: Avatar Nano
- Wheelbase: 75mm
- Size: 98mm x 98mm x 48mm
- Weight: 1.21oz (34.5g)
- Propellers: Gemfan 1610 2-Blade (40mm)
INCLUDES:
(4) Gemfan 1610-2 Bi-Blade Propellers (2CW + 2CCW / Red)
(1) Spare Canopy
(1) Screwdriver
(1) Prop Tool
Quick FAQs
Is the product I want in stock?
Is the product I want in stock?
Unless a product shows a status of "Out of Stock", it is in-stock and ready to be shipped or ordered for pick-up.
All items shown on our website are shipped out by our brick-and-mortar store in Jacksonville, Florida.
Where do you ship?
Where do you ship?
We currently ship to the United States and all US Territories, including Puerto Rico. To inquire about shipping to a different destination, please contact us.
When will I receive my order?
When will I receive my order?
Economy Shipping normally takes 5-8 days while Standard Shipping usually arrives in 3-5 days.
Please see our Shipping Policy for additional info including processing times.
Can I pick up my order?
Can I pick up my order?
Yes, we offer Free Pickup, during regular business hours, in addition to our standard shipping options at checkout.
How do I return a product?
How do I return a product?
Items can be returned In-Store during regular business hours.
For online purchases, please e-mail us at sales@rc-n-go.com for a Return Authorization.
Please see our Return Policy for more details.
