In-Store Repairs & Troubleshooting Available

Excellent Customer Service

Free In-Store Pickup
1 3
SKU: 87866070

HappyModel Mobula7 1S Brushless FPV Drone (BNF w/ FrSky)

$114.99

HappyModel Mobula7 1S Brushless FPV Drone (BNF w/ FrSky)

Introducing the Mobula7 1S, a tiny whoop that comes packing speed and efficiency. This drone features one of HappyModel's newest AIO brushless flight controllers that is capable of providing you with a significant RX and VTX range. 

 

FEATURES:

  • Compatible with 1S Lipo/LIHV only
  • Equipped with the Runcam Nano3
  • VTX Power up to 400mW
  • Built-in Frsky D8/D16 receiver

 

REQUIRED:

(1) Radio Controller w/ Compatible Radio Protocol
(1) Analog FPV Goggles

(1) 1S 450-650mAh LiPo Battery w/ PH2 Connector

 

SPECIFICATIONS:

Flight Controller:

  • MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
  • Sensor: Either MPU6000, ICM20689, or BMI270 (SPI connection)
  • Mount hole size: 25.5mm x 25.5mm
  • Power supply: 1S
    *This FC is capable of being powered with a 2S battery if using 2S-capable motors
  • Built-in 12A(each) Blheli_S 4in1 ESC
  • Built-in Betaflight OSD (SPI Control)
  • Built-in 5.8G OpenVTX 0mW~400mW
  • Built-in Frsky D8/D16
  • Built-in voltage meter sensor: Voltage meter scale 110
  • Built-in current meter sensor: Current meter scale 470

 

ESC:

  • Power Supply: 1S LiPo/LiPo HV (This ESC is capable of being powered with a 2S battery only if using 2S capable motors)
  • Current: 12A continuous peak 15A (3 seconds)
  • Support BLHeliSuite Programmable
  • Factory firmware: Z_H_30_REV16_7.HEX
  • Default Protocol: DSHOT300
  • Support Bluejay firmware

 

Receiver:

  • SPI BUS Receiver
  • CC2500 RF
  • Compatible Non-EU transmitter D8/D16 model
  • Channels: 8CH
  • Transmitter and Receiver 1m from the ground): 200meter Failsafe support
  • Supports FrSky D8/ D16, REDPINE, SFHSS

 

Motors:

  • Type: RS0802
  • KV: KV20000
  • Configuration: 9N12P
  • Stator Diameter: 8mm
  • Stator Length: 2mm
  • Shaft Diameter: Φ1.5mm
  • Motor Dimensions(Dia.*Len): Φ10.5mm x 13.5mm
  • Weight(g): 0.07oz (2.0g)
  • No. of Cells (LiPo): 1S only

 

Frame:

  • Camera: RunCam Nano 3
  • Wheelbase: 75mm
  • Size: 99mm x 99mm x 40mm
  • Weight: 0.85oz (24g)
  • Propellers: Gemfan 1610 2-Blade (40mm)

 

HELPFUL LINKS:

 

INCLUDES:

(1) HappyModel Mobula7 1S Brushless FPV Drone (BNF / FrSky)
(1) Spare Canopy
(4) Spare Gemfan 1610 2-Blade Propellers (2CW + 2CCW)
(1) Prop Remover Tool
(1) Screwdriver
(1) 4-Port 1S Parallel Charging Board with XT60 Connector & Balance Lead 
*To be used with a Li-Po Charger

NOTES:

  • If using Bluejay firmware with 48khz, should set the startup power to 1100/1200

Quick FAQs

Is the product I want in stock?

Unless a product shows a status of "Out of Stock", it is in-stock. All items shown on our website are shipped out by our brick-and-mortar store in Jacksonville, Florida during regular business hours.

Where do you ship?

We currently ship to the United States and all US Territories, including Puerto Rico.

When will I receive my order?

Processing times range from 24 - 36 hours or less, based on when an order is placed.

Once picked up by the designated shipper, Economy service takes approximately 5-8 days, with Standard Shipping at 3-5 days, with some locations taking a bit longer.

Please see our Shipping Policy for additional info and feel free to contact us for expedited shipping options.

Can I pick up my order?

Yes, we offer Free Pickup at our Jacksonville, Florida location, during regular business hours, in addition to our standard shipping options, at checkout.

How do I return a product?

Items can be returned In-Store during regular business hours.

For online purchases, please e-mail us at sales@rc-n-go.com for a Return Authorization.

Please see our Refund Policy for more details.

View All FAQs
Back to top