HappyModel Mobula7 1S Brushless FPV Drone (BNF w/ FrSky)
HappyModel Mobula7 1S Brushless FPV Drone (BNF w/ FrSky) is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
HappyModel Mobula7 1S Brushless FPV Drone (BNF w/ FrSky)
Introducing the Mobula7 1S, a tiny whoop that comes packing speed and efficiency. This drone features one of HappyModel's newest AIO brushless flight controllers that is capable of providing you with a significant RX and VTX range.
FEATURES:
- Compatible with 1S Lipo/LIHV only
- Equipped with the Runcam Nano3
- VTX Power up to 400mW
- Built-in Frsky D8/D16 receiver
REQUIRED:
(1) Analog FPV Goggles
(1) 1S 450-650mAh LiPo Battery w/ PH2 Connector
SPECIFICATIONS:
Flight Controller:
- MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
- Sensor: Either MPU6000, ICM20689, or BMI270 (SPI connection)
- Mount hole size: 25.5mm x 25.5mm
- Power supply: 1S
*This FC is capable of being powered with a 2S battery if using 2S-capable motors - Built-in 12A(each) Blheli_S 4in1 ESC
- Built-in Betaflight OSD (SPI Control)
- Built-in 5.8G OpenVTX 0mW~400mW
- Built-in Frsky D8/D16
- Built-in voltage meter sensor: Voltage meter scale 110
- Built-in current meter sensor: Current meter scale 470
ESC:
- Power Supply: 1S LiPo/LiPo HV (This ESC is capable of being powered with a 2S battery if using 2S capable motors)
- Current: 12A continuous peak 15A (3 seconds)
- Support BLHeliSuite Programmable
- Factory firmware: Z_H_30_REV16_7.HEX
- Default Protocol: DSHOT300
- Support Bluejay firmware
Receiver:
- SPI BUS Receiver
- CC2500 RF
- Compatible Non-EU transmitter D8/D16 model
- Channels: 8CH
- Transmitter and Receiver 1m from the ground): 200meter Failsafe support
- Supports FrSky D8/ D16, REDPINE, SFHSS
Motors:
- Type: RS0802
- KV: KV20000
- Configuration: 9N12P
- Stator Diameter: 8mm
- Stator Length: 2mm
- Shaft Diameter: Φ1.5mm
- Motor Dimensions(Dia.*Len): Φ10.5mm x 13.5mm
- Weight(g): 0.07oz (2.0g)
- No. of Cells (LiPo): 1S only
Frame:
- Camera: RunCam Nano 3
- Wheelbase: 75mm
- Size: 99mm x 99mm x 40mm
- Weight: 0.85oz (24g)
- Propellers: Gemfan 1610 2-Blade (40mm)
HELPFUL LINKS:
INCLUDES:
(1) HappyModel Mobula7 1S Brushless FPV Drone (BNF / FrSky)
(1) Spare Canopy
(4) Spare Gemfan 1610 2-Blade Propellers (2CW + 2CCW)
(1) Prop Remover Tool
(1) Screwdriver
(1) 4-Port 1S Parallel Charging Board with XT60 Connector & Balance Lead
*To be used with a Li-Po Charger
NOTES:
- If using Bluejay firmware with 48khz, should set the startup power to 1100/1200
Quick FAQs
Is the product I want in stock?
Is the product I want in stock?
Unless a product shows a status of "Out of Stock", it is in-stock and ready to be shipped or ordered for pick-up.
All items shown on our website are shipped out by our brick-and-mortar store in Jacksonville, Florida.
Where do you ship?
Where do you ship?
We currently ship to the United States and all US Territories, including Puerto Rico. To inquire about shipping to a different destination, please contact us.
When will I receive my order?
When will I receive my order?
Economy Shipping normally takes 5-8 days while Standard Shipping usually arrives in 3-5 days.
Please see our Shipping Policy for additional info including processing times.
Can I pick up my order?
Can I pick up my order?
Yes, we offer Free Pickup, during regular business hours, in addition to our standard shipping options at checkout.
How do I return a product?
How do I return a product?
Items can be returned In-Store during regular business hours.
For online purchases, please e-mail us at sales@rc-n-go.com for a Return Authorization.
Please see our Return Policy for more details.
