Hitec D956WP Digital High Torque Servo (25T Spline / Metal Gears)

Regular price $109.99

Shipping calculated at checkout. See Shipping Policy for shipping times.

The D956WP has arrived! Based on the D954SW servo, this IP-67-rated version is the true waterproof, dust-resistant upgrade for 1/10th-scale Rock Crawlers and Off-Road Trucks. As with Hitec's entire “D” line, this technologically-advanced servo is powered by a 32-bit MCU (Microcontroller Unit) and 12-bit ADC (Analog to Digital Converter) industrial science and possesses Smart Sense engineering with a rapid, high-resolution response. The unprecedented programmability and wide-voltage capabilities deliver the most progressive, leading-edge performance for all your radio control needs. With incredibly durable steel gears, dual ball bearings, and hardened steel output shaft, the high-end performing D956WP produces the mighty torque and reliability required to take bashers to the next level



  • Speed: @4.8V .19sec/60' / @7.4V .12sec/60'
  • Torque: @4.8V 251oz/in / @7.4V 405oz/in
  • Programmable PWM Digital Amplifier
  • 32-Bit MCU with 12-Bit ADC Circuitry
  • 4096 Resolution
  • 1M Cycle Long Life Potentiometer
  • Wide Operating Voltage (4.8 ~ 8.4 Volts DC)
  • Dual Ball Bearing Supported Output Shaft
  • 25-Tooth Output Spline
  • Coreless Metal Brush Motors
  • Nylon Reinforced Plastic Upper and Lower Case
  • Diamond Cut Aluminum Heat Sink Center Case
  • Water Resistant and Waterproof Proof Case



  • Bearing: Dual Ball Bearing
  • Bushing Or Bearing: Bearing
  • Gear Type: Metal
  • Wire Gauge: 20 AWG
  • Programmable: Yes
  • Servo Size Category: Standard
  • Application: High-Performance Aircraft, Cars, Boats
  • Product Weight: 2.40 oz (68.0g)
  • Spline Count: 25 - Tooth
  • Water-Resistant: Yes
  • Deadband: 1µs
  • Input Voltage: 4.8V ~ 7.4V
  • Product Height: 1.46" (37 mm)
  • Servo Type: Digital
  • Connector Type: Universal
  • Maximum Servo Speed: 0.19 sec/60 deg @ 4.8V, 0.12 sec/60 deg @ 7.4V
  • Product Length: 1.57" (40 mm)
  • Current Draw Stall: 5,200mA
  • Motor Type: Brushed
  • Servo Operating Voltage: 4.8 - 7.4V (HV)
  • Current Draw Idle: 30mA
  • Product Width: 0.78" (20 mm)
  • Maximum Servo Torque: 251oz/in @ 4.8V, 405oz/in @ 7.4V





(1) Hitec D956WP Digital High Torque Servo (25T Spline / Metal Gears)



Sold Out