SpeedyBee F405 BLS V4 Stack (60A / 30x30 / BLHeli_S / 3-6S)
SpeedyBee F405 BLS V4 Stack (60A / 30x30 / BLHeli_S / 3-6S) is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Expert Help
Expert Help
Need help selecting the right product? Get help fast.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
SpeedyBee F405 BLS V4 Stack (60A / 30x30 / BLHeli_S / 3-6S)
The SpeedyBee F405 V4 BLS 60A 30x30 FC&ESC Stack is an impressive combo for FPV Drones. The flight controller (FC) features an STM32F405 processor, onboard 4-level battery life indicator, 4GB Blackbox SD card slot, DJI Air Unit plug, and ICM42688P gyro.
The 60A 4-in-1 ESC boasts genuine 60A output, aluminum alloy heat sink, TVS protective diode, and SMD filtering capacitors.
SPECIFICATIONS:
Flight Controller:
- Input Voltage: 3-6S LiPo
- MCU: STM32F405
- IMU (Gyro): ICM42688P
- USB Port Type: Type-C
- Barometer: Built-in
- OSD Chip: AT7456E chip
- BLE Bluetooth: Supported. Used for Flight Controller configuration (MSP should be enabled with Baud rate 115200 on UART4)
- WIFI: Not supported
- DJI Air Unit Connection Way: Two ways supported: 6-pin connector or direct soldering.
- 6-pin DJI Air Unit Plug: Supported. Completely compatible with DJI O3/RunCam Link/Caddx Vista/DJI Air Unit V1, no wire changes needed.
- Blackbox MicroSD Card Slot: Betaflight firmware requires microSD cards to be either Standard (SDSC) or High capacity (SDHC) under 32GB. Extended capacity cards (SDXC) are not supported. Recommended format is FAT16 or FAT32.
- Current Sensor Input: Supported. For SpeedyBee BLS 60A ESC, set scale = 400 and Offset = 0.
- Power Input: 3S - 6S Lipo (Through G, BAT pins/pads from the 8-pin connector or 8-pads on the bottom side)
- 5V Output: 9 groups of 5V output, four +5V pads and 1 BZ+ pad (used for Buzzer) on front side, and 4x LED 5V pads. Total current load is 3A.
- 9V Output: 2 groups of 9V output, one +9V pad on front side and other included in a connector on bottom side. Total current load is 3A.
- 3.3V Output: Supported. Designed for 3.3V-input receivers. Up to 500mA current load.
- 4.5V Output: Supported. Designed for receiver and GPS module even when the FC is powered through the USB port. Up to 1A current load.
- ESC Signal: M1 - M4 on bottom side and M5-M8 on front side.
- UART: 6 sets (UART1, UART2, UART3, UART4 - Dedicated for Bluetooth connection), UART5 (Dedicated for ESC telemetry), UART6
- ESC Telemetry: UART R5
- I2C: Supported. SDA & SCL pads on front side. Used for magnetometer, sonar, etc.
- Traditional Betaflight LED Pad: Supported. 5V, G, and LED pads on bottom of the front side. Used for WS2812 LED controlled by Betaflight firmware.
- Buzzer: BZ+ and BZ- pads used for 5V Buzzer
- RSSI Input: Supported. Named as RS on the front side.
- Smart Port / F.Port: Not supported
- Supported Flight Controller Firmware: BetaFlight (Default), INAV
- Firmware Target Name: SPEEDYBEEF405V4
- Mounting: 30.5 x 30.5mm (4mm hole diameter)
- Dimensions: 41.6(L) x 39.4(W) x 7.8(H)mm
- Weight: 10.5g
ESC:
- Input Voltage: 3-6S LiPo
- Firmware: BLHeli_S J-H-40
- Continuous Current: 60A * 4
- Burst Current: 80A (10 sec)
- TVS Protective Diode: Yes
- External Capacitor: 1000uF Low ESR Capacitor (Included in the package)
- ESC Protocol: DSHOT300/600
- Power Output: VBAT
- Current Sensor: Support (Scale=400, Offset=0)
- ESC Telemetry: Not supported
- Mounting: 30.5 x 30.5mm (4mm hole diameter)
- Dimension: 45.6mm (L) * 44mm (W) * 8mm (H)
- Weight: 23.5g
HELPFUL LINKS:
INCLUDES:
(1) SpeedyBee F405 V4 Flight Controller
(1) SpeedyBee 60A BLHeli_S ESC
(1) M3 8.1mm Silicone Grommets (ESC)
(1) M3 8mm Silicone Grommets (FC)
(1) SH 1mm 25mm 8-Pin Cable (FC-ESC Connection)
(1) 35V 1000uF Low ESR Capacitor
(5) M3 30mm Iner-Hexagon Screw
(1) 100mm XT60 Power Cable
(1) 80mm DJI 6-Pin Cable
(5) M3 Silicone O Ring
(5) M3 Nylon Nut
NOTES:
- Manufacturer upgrades, alterations, and processor/firmware changes are frequently made without prior notice. Exact specifications, photos, and links cannot be guaranteed.
Quick FAQs
Is the product I want in stock?
Is the product I want in stock?
Unless a product shows a status of "Out of Stock", it is in-stock and ready to be shipped or ordered for pick-up.
All items shown on our website are shipped out by our brick-and-mortar store in Jacksonville, Florida.
Where do you ship?
Where do you ship?
We currently ship to the United States and all US Territories, including Puerto Rico. To inquire about shipping to a different destination, please contact us.
When will I receive my order?
When will I receive my order?
Economy Shipping normally takes 5-8 days while Standard Shipping usually arrives in 3-5 days.
Please see our Shipping Policy for additional info including processing times.
Can I pick up my order?
Can I pick up my order?
Yes, we offer Free Pickup, during regular business hours, in addition to our standard shipping options at checkout.
How do I return a product?
How do I return a product?
Items can be returned In-Store during regular business hours.
For online purchases, please e-mail us at sales@rc-n-go.com for a Return Authorization.
Please see our Return Policy for more details.